View LYT670J1K2_8904130.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

vlmh310., vlmo310., vlmy 310., vlmg310., vlmp310. www.vishay.com vishay semiconductors rev. 2.0, 04-nov-15 1 document number: 84789 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 standard smd led plcc-2 description these devices have been designed to meet the increasing demand for surface mo unting technology. the package of the vlm.310. is the plcc-2. it consists of a lead frame which is embedded in a white thermoplast. the reflector inside this package is filled up with clear epoxy. product group and package data ? product group: led ? package: smd plcc-2 ? product series: standard ? angle of half intensity: 60 features ? smd leds with exceptional brightness ? luminous intensity categorized ? compatible with automatic placement equipment ? eia and ice standard package ? compatible with infrared, vapor phase and wave solder processes according to cecc 00802 and j-std-020 ? available in 8 mm tape ? low profile package ? non-diffused lens: excellent for coupling to light pipes and backlighting ? low power consumption ? luminous intensity ratio in one packaging unit i vmax. /i vmin. 1.6 ? preconditioning according to jedec ? level 2a ? aec-q101 qualified ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 applications ? automotive: backlighting in dashboards, and switches ? telecommunication: indica tor and backlighting in telephone and fax ? indicator and backlight fo r audio and video equipment ? indicator and backlight in office equipment ? flat backlight for lcds, switches, and symbols ? general use 948553 parts table part color luminous intensity (mcd) at i f (ma) wavelength (nm) at i f (ma) forward voltage (v) at i f (ma) technology min. typ. max. min. typ. max. min. typ. max. vlmh3100-gs08 amber 2.8 10 - 10 612 619 625 10 - 2 2.8 20 gaasp on gap vlmh3100-gs18 amber 2.8 10 - 10 612 619 625 10 - 2 2.8 20 gaasp on gap vlmh3101-gs08 amber 4.5 8.7 11.2 10 612 619 625 10 - 2 2.8 20 gaasp on gap vlmh3101-gs18 amber 4.5 8.7 11.2 10 612 619 625 10 - 2 2.8 20 gaasp on gap vlmh3102-gs08 amber 7.1 10.3 18 10 612 619 625 10 - 2 2.8 20 gaasp on gap vlmh3102-gs18 amber 7.1 10.3 18 10 612 619 625 10 - 2 2.8 20 gaasp on gap vlmo3100-gs08 soft orange 2.8 8 - 10 598 605 611 10 - 2 2.8 20 gaasp on gap vlmo3100-gs18 soft orange 2.8 8 - 10 598 605 611 10 - 2 2.8 20 gaasp on gap vlmo3101-gs08 soft orange 4.5 8.6 11.2 10 598 605 611 10 - 2 2.8 20 gaasp on gap vlmo3101-gs18 soft orange 4.5 8.6 11.2 10 598 605 611 10 - 2 2.8 20 gaasp on gap vlmy3100-gs08 yellow 2.8 10 10 581 588 594 10 - 2.1 2.8 20 gaasp on gap vlmy3100-gs18 yellow 2.8 10 10 581 588 594 10 - 2.1 2.8 20 gaasp on gap vlmy3101-gs08 yellow 4.5 7.6 11.2 10 581 588 594 10 - 2.1 2.8 20 gaasp on gap vlmy3101-gs18 yellow 4.5 7.6 11.2 10 581 588 594 10 - 2.1 2.8 20 gaasp on gap vlmy3102-gs08 yellow 7.1 8.6 18 10 581 588 594 10 - 2.1 2.8 20 gaasp on gap vlmy3102-gs18 yellow 7.1 8.6 18 10 581 588 594 10 - 2.1 2.8 20 gaasp on gap
vlmh310., vlmo310., vlmy 310., vlmg310., vlmp310. www.vishay.com vishay semiconductors rev. 2.0, 04-nov-15 2 document number: 84789 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) in one packing unit i vmax. /i vmin. 1.6 vlmg3100-gs08 green 4.5 12 - 10 562 572 575 10 - 2.2 2.8 20 gap on gap vlmg3100-gs18 green 4.5 12 - 10 562 572 575 10 - 2.2 2.8 20 gap on gap vlmg3102-gs08 green 11.2 13.6 18 10 562 572 575 10 - 2.2 2.8 20 gap on gap vlmg3102-gs18 green 11.2 13.6 18 10 562 572 575 10 - 2.2 2.8 20 gap on gap vlmg3105-gs08 green 7.1 12 18 10 562 572 575 10 - 2.2 2.8 20 gap on gap vlmg3105-gs18 green 7.1 12 18 10 562 572 575 10 - 2.2 2.8 20 gap on gap vlmp3100-gs08 pure green 1.12 4 - 10 555 560 565 10 - 2.1 2.8 20 gap on gap vlmp3100-gs18 pure green 1.12 4 - 10 555 560 565 10 - 2.1 2.8 20 gap on gap vlmp3101-gs08 pure green 1.8 3.4 4.5 10 555 560 565 10 - 2.1 2.8 20 gap on gap vlmp3101-gs18 pure green 1.8 3.4 4.5 10 555 560 565 10 - 2.1 2.8 20 gap on gap vlmp3102-gs08 pure green 2.8 3.8 5.6 10 555 560 565 10 - 2.1 2.8 20 gap on gap vlmp3102-gs18 pure green 2.8 3.8 5.6 10 555 560 565 10 - 2.1 2.8 20 gap on gap vlmp3107-gs08 pure green 2.8 3.8 7.1 10 555 560 565 10 - 2.1 2.8 20 gap on gap vlmp3107-gs18 pure green 2.8 3.8 7.1 10 555 560 565 10 - 2.1 2.8 20 gap on gap absolute maximum ratings (t amb = 25 c, unless otherwise specified) vlmg310. ,vlmh310. ,vlmo 310. ,vlmp310. ,vlmy310. parameter test condition symbol value unit reverse voltage v r 6v dc forward current t amb 60 c i f 30 ma surge forward current t p 10 s i fsm 0.5 a power dissi pation t amb 60 c p v 100 mw junction temperature t j 100 c operating temperature range t amb -40 to +100 c storage temperature range t stg -40 to +100 c soldering temperature t 5 s t sd 260 c thermal resistance junction / ambient mounted on pc board (pad size > 16 mm 2 )r thja 400 k/w optical and electrical characteristics (t amb = 25 c, unless otherwise specified) vlmh310., amber parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 10 ma vlmh3100 i v 2.8 10 - mcd vlmh3101 i v 4.5 8.7 11.2 mcd vlmh3102 i v 7.1 10.3 18 mcd dominant wavelength i f = 10 ma d 612 619 625 nm peak wavelength i f = 10 ma p - 635 - nm angle of half intensity i f = 10 ma ? - 60- deg forward voltage i f = 20 ma v f -22.8v reverse voltage i r = 10 a v r 615- v junction capacitance v r = 0 v, f = 1 mhz c j -15-pf parts table part color luminous intensity (mcd) at i f (ma) wavelength (nm) at i f (ma) forward voltage (v) at i f (ma) technology min. typ. max. min. typ. max. min. typ. max.
vlmh310., vlmo310., vlmy 310., vlmg310., vlmp310. www.vishay.com vishay semiconductors rev. 2.0, 04-nov-15 3 document number: 84789 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) in one packing unit i vmax. /i vmin. 1.6 note (1) in one packing unit i vmax. /i vmin. 1.6 note (1) in one packing unit i vmax. /i vmin. 1.6 optical and electrical characteristics (t amb = 25 c, unless otherwise specified) vlmo310., soft orange parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 10 ma vlmo3100 i v 2.8 8 - mcd vlmo3101 i v 4.5 8.6 11.2 mcd dominant wavelength i f = 10 ma d 598 605 611 nm peak wavelength i f = 10 ma p - 605 - nm angle of half intensity i f = 10 ma ? - 60- deg forward voltage i f = 20 ma v f -22.8v reverse voltage i r = 10 a v r 615- v junction capacitance v r = 0 v, f = 1 mhz c j -15-pf optical and electrical characteristics (t amb = 25 c, unless otherwise specified) vlmy310., yellow parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 10 ma vlmy3100 i v 2.8 10 mcd vlmy3101 i v 4.5 7.6 11.2 mcd vlmy3102 i v 7.1 8.6 18 mcd dominant wavelength i f = 10 ma d 581 588 594 nm peak wavelength i f = 10 ma p - 585 - nm angle of half intensity i f = 10 ma ? - 60- deg forward voltage i f = 20 ma v f -2.12.8v reverse voltage i r = 10 a v r 615- v junction capacitance v r = 0 v, f = 1 mhz c j -15-pf optical and electrical characteristics (t amb = 25 c, unless otherwise specified) vlmg310., green parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 10 ma vlmg3100 i v 4.5 12 - mcd vlmg3102 i v 11.2 13.6 18 mcd vlmg3105 i v 7.1 12 18 mcd dominant wavelength i f = 10 ma d 562 572 575 nm peak wavelength i f = 10 ma p - 565 - nm angle of half intensity i f = 10 ma ? - 60- deg forward voltage i f = 20 ma v f -2.22.8v reverse voltage i r = 10 a v r 615- v junction capacitance v r = 0 v, f = 1 mhz - - 15 - pf
vlmh310., vlmo310., vlmy 310., vlmg310., vlmp310. www.vishay.com vishay semiconductors rev. 2.0, 04-nov-15 4 document number: 84789 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) in one packing unit i vmax. /i vmin. 1.6 note ? wavelengths are tested at a current pulse duration of 25 ms. note ? luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of 11 %. the above type numbers repres ent the order groups which include only a few brightness groups. only one group will be shipped on each reel (there will be no mixing of two groups on each reel). in order to ensure availability, single brightness groups will not be orderable. in a similar manner for colors where wavelength groups are measured and binned, single wave length groups will be shipped on any one reel. in order to ensure availability, single wavelength groups will not be orderable. optical and electrical characteristics (t amb = 25 c, unless otherwise specified) vlmp310., pure green parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 10 ma vlmp3100 i v 1.12 4 - mcd vlmp3101 i v 1.8 3.4 4.5 mcd vlmp3102 i v 2.8 3.8 5.6 mcd vlmp3107 i v 2.8 3.8 7.1 mcd dominant wavelength i f = 10 ma d 555 560 565 nm peak wavelength i f = 10 ma p - 555 - nm angle of half intensity i f = 10 ma ? - 60- deg forward voltage i f = 20 ma v f -2.12.8v reverse voltage i r = 10 a v r 615- v junction capacitance v r = 0 v, f = 1 mhz c j -15-pf color calssification group yellow green soft orange pure green dom. wavelength (nm) dom. wavelength (nm) min. max. min. max. min. max. min. max. 0------555559 1 581 584 - - 598 601 558 561 2 583 586 - - 600 603 560 563 3 585 588 - - 602 605 562 565 4 587 590 564 567 604 607 - - 5 589 592 566 569 606 609 - - 6 591 594 568 571 608 611 - - 7--570573---- 8--572575---- luminous intensity classification group light intensity (mcd) standard optional min. max. f 1 1.12 1.40 2 1.40 1.80 g 1 1.80 2.24 2 2.24 2.80 h 1 2.80 3.55 2 3.55 4.50 j 1 4.50 5.60 2 5.60 7.10 k 1 7.10 9.00 2 9.00 11.20 l 1 11.20 14.00 2 14.00 18.00 m 1 18.00 22.40 2 22.40 28.00
vlmh310., vlmo310., vlmy 310., vlmg310., vlmp310. www.vishay.com vishay semiconductors rev. 2.0, 04-nov-15 5 document number: 84789 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - maximum permissible forward current vs. ambient temperature fig. 2 - permissible pulse forward current vs. pulse duration fig. 3 - relative luminous in tensity vs. angular displacement fig. 4 - forward current vs. forward voltage crossing table vishay osram stanley vlmh3100 - - vlmh3101 - - vlmh3102 - - vlmo3100 lot670j1l2 - vlmo3101 lot670j1k2 - vlmy3100 lyt670j1l2 - vlmy3101 LYT670J1K2 - vlmy3102 lyt670k1l2 - vlmg3100 lgt670k1m2 vybg1104b vlmg3102 lgt670l1l2 - vlmg3105 lgt671k1l2 - vlmp3100 lpt670f2j2 - vlmp3101 lpt670g1h2 vybg1101w vlmp3102 lpt670h1j2 - vlmp3107 lpt670h1j1 - 0 10 20 30 40 60 i f - forward current (ma) 95 10905 50 t amb - ambient temperature (c) 100 80 60 40 20 0 0.01 0.1 1 10 1 10 100 1000 10 000 t p - pulse length (ms) 100 95 9985 i f - forward current (ma) dc t p /t = 0.005 0.5 0.2 0.1 0.01 0.05 0.02 t amb < 60 c 0.4 0.2 0 95 10319 0.6 0.9 0.8 0 30 10 20 40 50 60 70 80 0.7 1.0 i v rel - relative luminous intensity ? - angular displacement 0.1 1 10 100 v f - forward voltage (v) 5 4 3 2 i f - forward current (ma) amber 1 0
vlmh310., vlmo310., vlmy 310., vlmg310., vlmp310. www.vishay.com vishay semiconductors rev. 2.0, 04-nov-15 6 document number: 84789 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 5 - relative luminous inte nsity vs. ambient temperature fig. 6 - specific luminous intensity vs. forward current/duty cycle fig. 7 - relative luminous in tensity vs. forward current fig. 8 - relative intensity vs. wavelength fig. 9 - forward current vs. forward voltage fig. 10 - relative luminous inte nsity vs. ambient temperature 0 0.4 0.8 1.2 1.6 2.0 100 i v rel - relative luminous intensity t amb - ambient temperature (c) 0 20406080 amber 10 20 50 100 200 0 0.4 0.8 1.2 1.6 2.4 500 0.5 0.2 0.1 0.05 0.02 1 i f (ma) t p /t 2.0 i spec - specific luminous intensity amber 0.01 0.1 1 10 i f - forward current (ma) 100 10 1 i v rel - relative luminous intensity amber 590 610 630 650 670 0 0.2 0.4 0.6 0.8 1.2 690 - wavelength (nm) 1.0 i rel - relative intensity amber 0.1 1 10 100 95 9990 i - forward current (ma) f soft orange v f - forward voltage (v) 5 4 3 2 1 0 95 9994 soft orange 0 0.4 0.8 1.2 1.6 2.0 100 i v rel - relative luminous intensity t amb - ambient temperature (c) 020406080
vlmh310., vlmo310., vlmy 310., vlmg310., vlmp310. www.vishay.com vishay semiconductors rev. 2.0, 04-nov-15 7 document number: 84789 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 11 - specific luminous intensity vs. forward current/duty cycle fig. 12 - relative luminous in tensity vs. forward current fig. 13 - relative in tensity vs. wavelength fig. 14 - forward current vs. forward voltage fig. 15 - relative luminous inte nsity vs. ambient temperature fig. 16 - specific lum inous intensity vs. forward current/duty cycle 95 10259 soft orange 10 20 50 100 200 0 0.4 0.8 1.2 1.6 2.4 500 0.5 0.2 0.1 0.05 0.02 1 i f (ma) t p /t 2.0 i spec - specific luminous intensity 0.01 0.1 1 10 100 1 10 i f - forward current (ma) 95 9997 i - relative luminous intensity v rel soft orange 95 10324 soft orange 570 590 610 630 650 0 0.2 0.4 0.6 0.8 1.2 670 - wavelength (nm) 1.0 i rel - relative intensity yellow 0.1 1 10 100 95 9987 v f - forward voltage (v) i- forward current (ma) f 5 2 1 034 yellow 0 0.4 0.8 1.6 1.2 2.0 95 9992 i- relative luminous intensity v rel t amb - ambient temperature (c) 20 40 60 80 0 100 yellow 10 20 50 100 200 0 0.4 0.8 1.2 1.6 2.4 95 10260 500 0.5 0.2 0.1 0.05 0.02 1 i f (ma) t p /t i spec - specific luminous intensity 2.0
vlmh310., vlmo310., vlmy 310., vlmg310., vlmp310. www.vishay.com vishay semiconductors rev. 2.0, 04-nov-15 8 document number: 84789 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 17 - relative luminous in tensity vs. forward current fig. 18 - relative in tensity vs. wavelength fig. 19 - forward current vs. forward voltage fig. 20 - relative luminous inte nsity vs. ambient temperature fig. 21 - specific luminous intensity vs. forward current fig. 22 - relative luminous in tensity vs. forward current yellow i f - forward curren t (ma) 100 0.01 0.1 1 10 95 9999 i- relative luminous intensity v rel 10 1 550 570 590 610 630 0 0.2 0.4 0.6 0.8 1.2 650 95 10039 - wavelength (nm) 1.0 yellow i rel - relative intensity green 0.1 1 10 100 v f - forward voltage (v) i- forward current (ma) f 5 2 1 03 95 9986 4 green 0 0.4 0.8 1.6 1.2 2.0 95 10320 i- relative luminous intensity v rel t amb - ambient temperature (c) 20 40 60 80 0 100 10 20 50 100 200 0 0.4 0.8 1.2 1.6 2.4 95 10263 500 2.0 green i spec - specific luminous intensity i f (ma) 0.5 0.2 0.1 0.05 0.02 1 t p /t green i f - forward current (ma) 100 0.01 0.1 1 10 95 9996 i- relative luminous intensity v rel 10 1
vlmh310., vlmo310., vlmy 310., vlmg310., vlmp310. www.vishay.com vishay semiconductors rev. 2.0, 04-nov-15 9 document number: 84789 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 23 - relative in tensity vs. wavelength fig. 24 - forward current vs. forward voltage fig. 25 - relative luminous inte nsity vs. ambient temperature fig. 26 - specific luminous intensity vs. forward current fig. 27 - relative luminous in tensity vs. forward current fig. 28 - relative in tensity vs. wavelength 520 540 560 580 600 0 0.2 0.4 0.6 0.8 1.2 620 95 10038 - wavelength (nm) 1.0 green i rel - relative intensity 02 0.1 1 10 100 5 95 9988 pure green i f - forward current (ma) v f - forward voltage (v) 13 4 0 0.4 0.8 1.2 1.6 2.0 95 9991 pure green i v rel - relative luminous intensity t amb - ambient temperature (c) 0100 80 60 40 20 95 10261 10 1000 100 0 0.4 0.8 1.2 1.6 2.4 2.0 pure green i spec - specific luminous flux i f - forward current (ma) 0.01 0.1 1 10 100 10 1 95 9998 pure green i v rel - relative luminous intensity i f - forward current (ma) 500 520 540 560 580 0 0.2 0.4 0.6 0.8 1.2 600 95 10325 1.0 pure green - wavelength (nm) i rel - relative intensity
vlmh310., vlmo310., vlmy 310., vlmg310., vlmp310. www.vishay.com vishay semiconductors rev. 2.0, 04-nov-15 10 document number: 84789 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters drawing-no.: 6.541-5067.01-4 s pecification s according to din technical drawing s i ss ue: 6; 23.09.13 dimen s ion s in mm c a ?2.4 pin identification 3.5 0.2 1.75 0.1 0.9 2.8 0.15 2.2 3 +0.15 0 . 8 mounting pad layout 4 4 1.2 2.6 (2.8) 1.6 (1.9) dimen s ion s : reflow and vapor pha s e (wave s oldering) area covered with s olderre s i s t
vlmh310., vlmo310., vlmy 310., vlmg310., vlmp310. www.vishay.com vishay semiconductors rev. 2.0, 04-nov-15 11 document number: 84789 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 method of taping / polarity and tape and reel smd led (vlm.3-series) vishays leds in smd packages are available in an antistatic 8 mm blister tape (in accordance with din iec 40 (co) 564) for automatic component insertion. the blister tape is a plastic strip with impressed component cavities, covered by a top tape. taping of vlm.3... fig. 29 - tape dimens ions in mm for plcc-2 reel package dimension in millimeters for smd leds, tape option gs08 (= 1500 pcs.) fig. 30 - reel dimensions - gs08 reel package dimens ion in millimeters for smd leds, tape option gs18 (= 8000 pcs.) preferred fig. 31 - reel dimensions - gs18 soldering profile fig. 32 - vishay lead (pb)-free reflow soldering profile (acc. to j-std-020) fig. 33 - double wave soldering of opto devices (all packages) adhesive tape component cavity blister tape 94 8670 1.85 1.65 4.0 3.6 3.6 3.4 2.05 1.95 1.6 1.4 4.1 3.9 4.1 3.9 5.75 5.25 8.3 7.7 3.5 3.1 2.2 2.0 0.25 94 8668 180 178 4.5 3.5 2.5 1.5 13.00 12.75 63.5 60.5 14.4 max. 10.0 9.0 120 94 8665 identification label: vishay type group tape code production code quantity 321 329 identification 4.5 3.5 2.5 1.5 13.00 12.75 62.5 60.0 14.4 max. 10.4 8.4 120 18857 label: vishay type group tape code production code quantity 0 50 100 150 200 250 300 0 50 100 150 200 250 300 time (s) temperature (c) 240 c 245 c max. 260 c max. 120 s max. 100 s 217 c max. 30 s max. ramp up 3 c/s max. ramp down 6 c/s 19885 ir reflow soldering profile for lead (pb)-free soldering preconditioning acc. to jedec level 2a max. 2 cycles allowed 255 c 235 c to 260 c 2 k/s ca. 200 k/s second wave first wave 5 s full line: typical dotted line: process limits time (s) temperature (c) lead temperature 300 250 200 150 100 50 0 0 50 100 150 200 250 948626-1 ttw soldering (acc. to cecc00802) 100 c to 130 c forced cooling ca. 2 k/s ca. 5 k/s
vlmh310., vlmo310., vlmy 310., vlmg310., vlmp310. www.vishay.com vishay semiconductors rev. 2.0, 04-nov-15 12 document number: 84789 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 bar code product label (example) a. type of component b. manufacturing plant c. sel - selection code (bin): e.g.: k1 = code for luminous intensity group 4 = code for color group d. date code year / week e. day code (e.g. 2: tuesday) f. batch no. g. total quantity h. company code dry packing the reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. final packing the sealed reel is packed in to a cardboard box. a secondary cardboard box is used for shipping purposes. recommended method of storage dry box storage is recommended as soon as the aluminum bag has been opened to preve nt moisture absorption. the following conditions should be observed, if dry boxes are not available: ? storage temperature 10 c to 30 c ? storage humidity 60 % rh max. after more than 672 h under these conditions moisture content will be too high for reflow soldering. in case of moisture absorptio n, the devices will recover to the former condition by drying under the following condition: 192 h at 40 c + 5 c / - 0 c and < 5 % rh (dry air / nitrogen) or 96 h at 60 c + 5 c and < 5 % rh for all device containers or 24 h at 100 c + 5 c not suitable for reel or tubes. an eia jedec standard jesd22 -a112 level 2a label is included on all dry bags. example of jesd22-a1 12 level 2a label esd precaution proper storage and handling pr ocedures should be followed to prevent esd damage to the devices especially when they are removed from the antistatic shielding bag. electrostatic sensitive devices warning labels are on the packaging. vishay semiconductors standard bar code label the vishay semiconductors st andard bar code labels are printed at final packing areas. the labels are on each packing unit and contain vishay semiconductors specific data. 106 37 vishay a h bc d e f g 19788 aluminum bag label reel 15973 l e v e l caution this bag contains moisture ? sensitive devices 1. shelf life in sealed bag 12 months at <40c and < 90% relative humidity (rh) 2. after this bag is opened devices that will be subjected to infrared reflow, vapor - phase reflow, or equivalent processing (peak package body temp. 260c) must be: a) mounted within 672 hours at factory condition of < 30c/60%rh or b) stored at <1 0% rh. 3. devices require baking before mounting if: a) humidity indicator card is >10% when read at 23c + 5c or b) 2a or 2b is not met. 4. if baking is required, devices may be baked for: 192 hours at 40c + 5c/ - 0c and <5%rh (dry air/nitrogen) or 96 hours at 605 o cand <5%rh for all device containers or 24 hours at 1005c not suitable for reels or tubes bag seal date: ______________________________ (if blank, see bar code label) note: level defined by eia jedec standard jesd22 - a113 2a 19786
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.

▲Up To Search▲

Price & Availability of LYT670J1K2

	To Download LYT670J1K2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .